Automatic Double-Sided Gluing Small Curved Edge Banding Machine | In Stock

Ready From Stock — Single-unit orders of the 910H ship with voltage confirmed and a factory test record, so your workshop avoids the transformer wait that stalls commissioning.

Technical Specifications

Application Suitability

Why the Voltage Question Must Come Before You Hit Checkout

A machine that matches your workshop's existing supply arrives ready to run — one that does not sits idle while you source a transformer.

I have watched small joinery shops lose entire weeks because the edge bander on the dock was wired for a three-phase supply the building simply does not carry. The 910H is configured for 220V 50Hz single-phase power as standard, which covers most small workshops across Southeast Asia, the Middle East, and parts of South America. If your local grid runs a different voltage or frequency, flagging this at the ordering stage — not after the crate arrives — is the difference between plugging in on day one and waiting on an electrical contractor. [NEED_CITE: voltage and frequency standards by export market]

Specifying your supply upfront also means the heating element, motor windings, and control transformer inside the 910H are all matched to what your breaker panel actually delivers, reducing the risk of thermal overload during the first production run.

Dispatch Without the Usual Lead-Time Guesswork

Ordering an Automatic Edge Banding Machine in stock means the 910H is already assembled, tested, and crated — not sitting in a production queue waiting for a batch run to finish. For a small workshop that cannot afford a multi-week gap between old equipment and new, this shortens the window from purchase decision to first edged panel. Fast delivery applies to single-unit orders, so you do not need to commit to a container load just to secure a ship date.

One Machine, Both Curved and Straight Edges

The 910H handles curved and straight edge banding through a physical 180-degree rotation of the feed assembly, rather than relying on a separate attachment or a second machine entirely. For a startup cabinet maker producing both flat wardrobe panels and curved reception desk fronts, this removes the need to budget for two dedicated stations. The pneumatic strip cutter and double-row rubber pressure wheels keep operator intervention minimal, which matters when one person is running the machine alone. [NEED_CITE: typical single-operator workflow in small joinery workshops]

Reading the Specs That Actually Affect Your Panels

The 10–50 mm panel thickness range covers the most common board stocks a small furniture shop encounters — thin 10 mm drawer sides up through 50 mm solid-wood tabletop blanks. Staying within this window ensures the adjustable aluminum alloy pressure beam can maintain even feed pressure, which directly affects glue transfer consistency.

The 1000 ml glue pot capacity supports extended runs between refills, reducing the number of mid-shift stops that interrupt rhythm and introduce cold-start glue inconsistencies. For shops running PVC and veneer strips in the 0.5–2.5 mm range, the dual 800 W trimming motors and 180 W × 2 polishing units provide enough cutting and finishing authority to leave a clean edge without a secondary hand-sanding pass.

The 4 kW total rated power draw means the 910H can typically share a workshop circuit with a small dust collector, though a dedicated breaker is always the safer choice for consistent heating element performance.

The Hidden Cost of Ordering on Spec Alone

Buying an edge bander purely from a catalog photo, without confirming the glue pot type, strip thickness range, or air pressure requirement, often surfaces as a problem only after the first batch of panels fails downstream assembly. A trimming station designed for 0.5–2.5 mm strip may struggle with 3 mm ABS, leaving visible witness marks that force rework. Inadequate air pressure at the workshop compressor can cause the pneumatic strip cutter to misfire, producing ragged ends that no amount of polishing will clean up. [NEED_CITE: compressed air supply requirements for pneumatic woodworking attachments] These issues are not machine defects — they are configuration mismatches that a brief pre-order conversation would have prevented.

Why Sourcing This Model Through Ruiqi Shop Makes Sense

Voltage is confirmed against your local supply before the 910H leaves the factory, eliminating the transformer delay that stalls so many small-shop installations. Pre-shipment testing covers actual panel runs at your specified thickness, and the test record ships with the crate so you can verify performance on arrival.

The operation manual is prepared in the language your operator reads, not a generic translation that leaves critical setup steps ambiguous. A one-year warranty covers factory-origin faults with spare parts replacement, and the spare parts list is included so reordering consumables like trimming cutters and pressure wheel inserts is straightforward.

Single-unit ordering is standard — there is no minimum order quantity forcing a small workshop to over-invest in equipment it is not yet ready to run at full capacity.

Documentation & Verification

• CE declaration of conformity covering the 910H electrical and mechanical safety requirements
• Factory test record documenting actual edge banding runs on your specified panel thickness
• Electrical schematic confirming 220V 50Hz wiring and breaker sizing for your electrician
• Operation and maintenance manual in your chosen language with illustrated setup steps
• Spare parts list with part numbers for trimming cutters, polishing pads, and pressure wheels
• Packing photographs taken before crating for transit condition verification

Installation, Commissioning & Support

• 1300 × 560 mm footprint fits through standard workshop doors without structural modification
• Dedicated 220V single-phase circuit with appropriate breaker rating required for the 4 kW total load
• Partial KD assembly — pressure beam, dust hood, and feed table attach on-site with basic hand tools
• First-run parameter setting for glue temperature, feed speed, and trimming depth included in the manual
• 0.4–0.6 MPa compressed air supply needed at the machine inlet for pneumatic strip cutting
• Replacement trimming cutters and polishing pads listed with part numbers for direct reorder

Before You Place Your Order

Share your local voltage and frequency, the panel materials and thicknesses you run most often, and whether your workshop compressor can sustain 0.4–0.6 MPa at the machine inlet. If you are running both curved and straight components, let us know the typical strip material — PVC, ABS, or veneer — so the glue and trimming setup matches your production from the first shift.

Frequently Asked Questions

Q: What is the dispatch lead time for a single-unit order of the 910H? A: Stocked units of the 910H are prepared for dispatch once voltage confirmation and pre-shipment testing are complete. This typically takes a short period after your order details are finalized. You receive packing photographs and tracking details so you can plan workshop space and electrical preparation before the crate arrives.

Q: Can you arrange door-to-door shipping and customs clearance to my country? A: Shipping options are quoted upfront at the time of order, covering freight to your nearest port or door-to-door delivery depending on your preference. Customs documentation support is included, with all necessary export paperwork prepared by the factory. You confirm the delivery address and preferred Incoterm, and the logistics arrangement follows directly.

Q: Is the 220V 50Hz configuration fixed, or can I request a different voltage? A: The 910H is built for 220V 50Hz as standard, but voltage and frequency must match your local supply. If your workshop runs a different standard, specify this before checkout so the motor windings, heating element, and control transformer are configured correctly. Confirming this at order stage avoids the need for an external transformer on arrival.

Q: Do I need to assemble the machine myself, and how straightforward is the setup? A: The 910H ships with partial KD packing, meaning components like the pressure beam and dust hood require on-site attachment using basic hand tools. The operation manual includes illustrated assembly steps in your chosen language. Most small workshop operators complete setup within a single working session and run the first test panel the same day.

Q: What spare parts come included, and how do I order replacements later? A: A spare parts list with part numbers is included in the documentation package, covering consumables such as trimming cutters, polishing pads, and pressure wheel inserts. Initial spare parts are packed with the machine. Reordering is handled through the same channel you used to purchase, using the part numbers from the list for accurate fulfillment.